阿卡迪亚中央车站

Description

阿卡迪亚中央车站 is the centerpiece of a scalable IP networked intercom platform with support for more than 100 wired and wireless intercom user stations of various form factors, 频率和连通性. Coupled with Dante and analog interfacing of audio and control, 阿卡迪亚适合任何基础设施. Arcadia’s compact 1RU form factor is capable of mixing 180 audio signals, 设有前面板对讲用户站, fast and easy setup, 配置和监控. With the future-proof ability to grow in capacity and features over time, 阿卡迪亚是理想的对讲系统.

FreeSpeak -无线对讲机

Arcadia supports the FreeSpeak family of wireless intercom, including 1.9 GHz, 2.4 GHz and 5 GHz frequency bands which can be concurrently deployed on an Arcadia system*. FreeSpeak天线收发器, connected via E1 CAT/Fiber plug and play cable connections or IP using AES67 capable networks, can be modularly added for coverage and capacity of beltpacks which can seamlessly roam between overlapping transceivers. FreeSpeak beltpacks can have their keys assigned to any Channel, Group或Interface系统的端口. 每个FreeSpeak腰带包需要一个阿卡迪亚许可端口**.

HelixNet -有线对讲机

阿卡迪亚支持HelixNet有线对讲机, 包括HRM-4X远程站, HKB-2X扬声器站和HXII-BP腰带包. This is done by selectively enabling channels to be available to the decentralized mixing of intercom and Program Audio in HelixNet Endpoints, providing a high degree of operational elasticity to the Arcadia system. HelixNet user stations connect to Arcadia via an IP network and can have their keysets assigned to any HelixNet Enabled Channel on the Arcadia system. Each HelixNet Enabled Channel requires an Arcadia Licensed Port**.

Dante, Analog Audio & 控制-接口

Arcadia can interface to a variety of audio and intercom systems with audio interface ports 可分配给任何通道, Group, 系统上的FreeSpeak和Arcadia密钥集:

• Dante audio network interfaces allow any Dante input or output to connect to Arcadia. 每个Dante端口都需要一个Arcadia许可端口**.

• 4-Wire provides the ability to connect analog line-level audio inputs and outputs to Arcadia.

• 2-Wire Partyline allows interfacing to existing analog partyline intercom system infrastructures or to add Partyline user stations or interfaces using Arcadia’s built in power supply.

•GPIO为系统控制提供输入和继电器输出. Inputs allow activation of audio crosspoints while Outputs can be activated upon key presses, audio crosspoints and or call signals configurable in Arcadia’s Logic configurator.

对讲用户站

Arcadia’s front panel user station provides four keysets on large, high resolution, color touch screens, 可分配给任何通道, Group, FreeSpeak beltpack, 阿卡迪亚系统上的程序音频或舞台公告. 用户站配有耳机连接, gooseneck mic connector and a loudspeaker in addition to All Call, 舞台宣布和远程麦克风关闭.

系统配置

Arcadia front panel menus provide the ability to configure the basic system configuration using an interface consisting of the easy to navigate color touch screens coupled with tactile rotary encoders and buttons. With the front panel, wireless beltpacks and transceivers can be added to the system, 2-Wire connections can be nulled and network addresses configured. Arcadia’s Core Configuration Manager™ (CCM) is an integrated, 基于浏览器的配置实用程序，支持快速设置, 配置和监控. The intuitive user interface has a consistent design for a quick and simple means of configuring an Arcadia based intercom system.

许可端口-可扩展容量

Arcadia is a powerful hardware platform which allows capacity to be activated as customer requirements grow or features are developed for this dynamic platform. Arcadia’s flexible licensing options allow right-sizing of the system required via Licensed Port Capacity. As the need for greater capacity grows or a new feature is needed, field deployable 授权端口升级 can be used to increase Arcadia’s intercom footprint.

*1.9ghz带包不能在E1和IPT收发器之间漫游. 1.9 GHz E1 and IPT transceivers should not overlap on the same system.

**要求阿卡迪亚拥有足够数量的许可端口.